Pocket Shop

J-B Weld is a hand kneadable, steel-reinforced epoxy putty adhesive/sealant that will plug holes and make permanent repairs on wet and dry surfaces. It will even cure completely submerged in water or gasoline! Simply knead thoroughly, with your fingers, a portion necessary for the repair and apply. J-B Stik will fully cure in 20-30 minutes and can be drilled, sanded, filed, tapped, machined, and painted.

A quality automotive masking tape that provides excellent adhesion to a variety of substrates and a sharp paint line.

A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly.

Our Genuine Honda coolant contains no silicates or borates. Designed to keep corrosion and pitting from your engines componants. This is a "blue" coolant that is safe for use on all Honda engines. Trust Genuine Honda

Ideal for attaching vehicle body side moldings, trim and emblems. Strong bonding and easy to use. Cut to size, no mess.

This Permatex black RTV silicone seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. It protects and repairs electrical wiring and may be applied to horizontal or vertical surfaces. It is waterproof and flexible with a temperature range of -75 degrees Fahrenheit to 450 degrees Fahrenheit; resists oil, water, weather, vibration and grease.

Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high-temperature stability, extreme- pressure protection, and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100 degree Farenheit to 500 degree Farenheit and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. Possesses a very high melting point, excellent water washout resistance and superior antiwear which makes it excellent for high temperatures and extreme loads. CV-2 contains an organic moly and is for wheel bearings, high angle and conventional CV joints, chassis lubrication and high temperature, high speed industrial equipment. The exceptional extreme- pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200 percent to 800 percent. Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high- temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.

Don't scrap it. J-B Weld it. J-B Weld company offers the most durable cold weld products available. J-B Weld products provide cost effective repair options even on items most people think can not be repaired. Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC, and CPVC. Kwik plastic can be used to rebuild automotive trim, fiberglass parts and vinyl siding. It bonds instantly and sets in twenty minutes with a superior strength and does not shrink or pull away.

Metal Rescue Rust Remover Bath is your clean, safe and easy solution to removing rust from iron and steel.  It is "safe on everything except rust".  Metal Rescue Rust Remover Bath will take rust off the most heavily corroded metal parts, yet is safe enough that you can put your bare hands into it.  Just soak, check and rinse/dry.  It's that simple.

Max-Gear is an ultra-tough automotive gear oil. It's designed to maximize power and provide unsurpassed protection to heavily loaded gears. It makes gears run smoother, quieter, cooler and longer without overhauls. Max-Gear outperforms other gear oils because it combines the highest quality synthetic oils with Royal Purple's proprietary Synerlec additive technology. Max-Gear is recommended for use in truck, motor home/RV and automotive front or rear differentials, manual transmissions, and lower gear units of marine engines that specify use of an API GL-5 or GL-4 fluid. All viscosities of Max-Gear are formulated with hypoid friction modifiers necessary for use in clutch or cone type differentials. No additional additives are necessary.